EARSPEAKER SYSTEM: SRS-3010
SRM-310 + SR-202
SRM-323II Brochure
Under construction

■ Features 
This earspeaker and driver unit will allow any high-level audiophile to enjoy a wide variety of combinations. An intelligent set model that can be placed by the bedside or in any private space without having to worry about combinations is also being released simultaneously. The system is supplied as a set consisting of the exclusive system model SR-202 Basic and the driver unit SRM-310.
●A push-pull signal is obtained by low-noise FET input OP Amp, for ICL input.
The output stage consists of a simple inverting amplifier based on low-noise FETs and high voltage transistors.
●The SRM-310 adopted the regulated power for clear sound in bias voltage and power supply.
●Attachment of parallel input and output terminals make with connection to an amplifier for loudspeaker and earspeakers.

■ Specifications
●Frequency response: 4-60KHz +0, -3dB SR-202 load
●Rated input level: 200 mV with 100V output
●Maximum input level 30 V r.m.s. with volume at minimum setting
●Amplification: 54 dB (x500)
●Total harmonic distortion max. 0.02% (1 kHz / during 100 V r.m.s. outputSR-202 load ) 
●Input impedance 70 kΩ (RCA) 
●Maximum output voltage: 350 V r.m.s. / 1 kHz 
●Standard bias voltage DC580 V (PRO bias)
●Power voltage AC120V-240V ± 10%, 50 to 60 Hz. (Adjusted for your area)
●Power consumption 10 W
●Temperature range for use Between 0º and 35ºC, max. 90% (no condensation)
●External dimensions 85(W) Bottom 130×275(H) ×130(D) mm
●Weight 1.7 Kg
Specifications and external appearance may be changed without notice in order to improve performance.

Copyright (C) 2007 STAX Ltd. All Rights Reserved.